CORRECT CRAFT G21 Instrukcja Operatora Pobierz pdf (Strona 6)

4.0 INSTALLATION INSTRUCTIONS

4.1 P

OLARITY

ROTECTION

(

AND

LED I

NDICATIONS

)

CAUTION: Although the ProStar is fully protected from

reversed polarity, the system operator and other

equipment may be at risk when polarities are

reversed. Carefully check each connection and

observe the LED’s to make sure polarity is correct.

CONNECTION POLARITY RESULT AND LED INDICATION

Battery Correct All 5 LED’s will sequence one time.

BATTERY TYPE

indicator will remain on

(default is sealed). The green

BATTERY

CHARGE

indicator will light within 15 sec-

onds, and will then cycle to the correct state.

Battery Reversed No LED’s will light. No damage will occur.

Sense Correct No additional indications.

Sense Reversed If the battery has been connected cor-

rectly, there will be sparking at the termi-

nals. If the negative sense lead is con-

nected first, no damage will occur (small

possibility of damage if positive connect-

ed first). There will be no indications.

PV Array Correct LED’s will light only if the battery has

been connected. During daytime with

battery present, the

CHARGING

indica-

tor will light after a 2 minute delay.

PV Array Reversed No damage will occur. The

CHARGING

indicator will not light after the 2 minute

delay.

Load N/A If a load short-circuit exists, load will

instantly disconnect to protect the

controller. LED’s will then sequence

to indicate a short.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

CORRECT CRAFT G21 Instrukcja Operatora Strona 6

Komentarze do niniejszej Instrukcji